Batting

W G Grace "taking guard" in 1883. His pads and bat are very similar to those used today. The gloves have evolved somewhat. Many modern players utilise more defensive equipment than was available to Grace, notably helmets and arm guards.

At any one time, there are two batsmen in the playing area. One takes station at the striker's end to defend the wicket as above and to score runs if possible. His partner, the non-striker, is at the end where the bowler is operating.

Batsmen come in to bat in a batting order, decided by the team captain. The first two batsmen – the "openers" – usually face the most hostile bowling from fresh fast bowlers with a new ball. The top batting positions are usually given to the most competent batsmen in the team, and the non-batsmen typically bat last. The pre-announced batting order is not mandatory and when a wicket falls any player who has not yet batted may be sent in next.

If a batsman "retires" (usually due to injury) and cannot return, he is actually "not out" and his retirement does not count as a dismissal, though in effect he has been dismissed because his innings is over. Substitute batsmen are not allowed.

A skilled batsman can use a wide array of "shots" or "strokes" in both defensive and attacking mode. The idea is to hit the ball to best effect with the flat surface of the bat's blade. If the ball touches the side of the bat it is called an "edge". Batsmen do not always seek to hit the ball as hard as possible, and a good player can score runs just by making a deft stroke with a turn of the wrists or by simply "blocking" the ball but directing it away from fielders so that he has time to take a run.

There is a wide variety of shots played in cricket. The batsman's repertoire includes strokes named according to the style of swing and the direction aimed: e.g., "cut", "drive", "hook", "pull".

Note that a batsman does not have to play a shot and can "leave" the ball to go through to the wicketkeeper, providing he thinks it will not hit his wicket. Equally, he does not have to attempt a run when he hits the ball with his bat. He can deliberately use his leg to block the ball and thereby "pad it away" but this is risky because of the leg before wicket rule.

In the event of an injured batsman being fit to bat but not to run, the umpires and the fielding captain may allow another member of the batting side to be a runner. If possible, the runner must already have batted. The runner's only task is to run between the wickets instead of the injured batsman. The runner is required to wear and carry exactly the same equipment as the incapacitated batsman. It is possible for both batsmen to have runners

Dismissals

Wicketkeeper Mahendra Singh Dhoni of India successfully stumps a South African batsman out during a match played in Chennai in 2008.

There are ten ways in which a batsman can be dismissed and some are so unusual that only a few instances of them exist in the whole history of the game. The most common forms of dismissal are "bowled", "caught", "leg before wicket" (lbw), "run out", "stumped" and "hit wicket". The unusual methods are "hit the ball twice", "obstructed the field", "handled the ball" and "timed out".

Before the umpire will award a dismissal and declare the batsman to be out, a member of the fielding side (generally the bowler) must "appeal". This is invariably done by asking (or shouting) the term "Howzat?" which means, simply enough, "How is that?" If the umpire agrees with the appeal, he will raise a forefinger and say "Out!". Otherwise he will shake his head and say "Not out". Appeals are particularly loud when the circumstances of the claimed dismissal are unclear, as is always the case with lbw and often with run outs and stumpings.

1. Bowled: the bowler has hit the wicket with the ball and the wicket has "broken" with at least one bail being dislodged (note that if the ball hits the wicket without dislodging a bail it is not out).^[14]
2. Caught: the batsman has hit the ball with his bat or with his hand and the ball has been caught before it has touched the ground by a member of the fielding side.^[15]
3. Leg before wicket (lbw): first and foremost, the ball must, in the opinion of the on-field umpire, be going on to hit the stumps if the ball had not hit the pad of the batsman first. If the batsman plays an attempted shot to the delivery, then the ball must hit the batsman's pad in line with the stumps and be going on to hit the stumps for the batsman to be given out. If the batsman does not attempt to play a shot, then the ball does not have to hit the pad in line with the stumps but it still must be going on to hit the stumps. If the ball pitches outside the leg stump, then the batsman cannot be given out under any circumstances.^[16]
4. Run out: a member of the fielding side has broken or "put down" the wicket with the ball while a batsman was out of his ground; this usually occurs by means of an accurate throw to the wicket while the batsmen are attempting a run.^[17]
5. Stumped is similar except that it is done by the wicketkeeper after the batsman has missed the bowled ball and has stepped out of his ground, and is not attempting a run.^[18]
6. Hit wicket: a batsman is out hit wicket, if he dislodges one or both bails with his bat, person, clothing or equipment in the act of hitting the ball, or when setting off for a run.^[19]
7. Hit the ball twice is very unusual and was introduced as a safety measure to counter dangerous play and protect the fielders. The batsman may legally play the ball a second time only to stop the ball hitting the wicket after he has already played it.^[20]
8. Obstructed the field: another unusual dismissal which tends to involve a batsman deliberately getting in the way of a fielder.^[21]
9. Handled the ball: a batsman must not deliberately use his hand to protect his wicket (note that the bowled ball often hits the batsman's hand but this is not intentional by the batsman and so is not out; though he can of course be caught off his hand).^[22]
10. Timed out usually means that the next batsman did not arrive at the wicket within three minutes of the previous one being dismissed.^[23]

In the vast majority of cases, it is the striker who is out when a dismissal occurs. If the non-striker is dismissed it is usually by being run out, but he could also be dismissed for obstructing the field, handling the ball or being timed out.

A batsman may leave the field without being dismissed. If injured or taken ill the batsman may temporarily retire, and be replaced by the next batsman. This is recorded as retired hurt or retired ill. The retiring batsman is not out, and may resume the innings later. An unimpaired batsman may retire, and this is treated as being dismissed retired out; no player is credited with the dismissal. Batsmen cannot be outbowled, caught, leg before wicket, stumped or hit wicket off a no ball. They cannot be out bowled, caught, leg before wicket, or hit the ball twice off a wide. Some of these modes of dismissal can occur without the bowler bowling a delivery. The batsman who is not on strike may berun out by the bowler if he leaves his crease before the bowler bowls, and a batsman can be out obstructing the field or retired out at any time.Timed out is, by its nature, a dismissal without a delivery. With all other modes of dismissal, only one batsman can be dismissed per ball bowled.

Innings closed

An innings is closed when:

1. Ten of the eleven batsmen are out (have been dismissed); in this case, the team is said to be "all out"
2. The team has only one batsman left who can bat, one or more of the remaining players being unavailable owing to injury, illness or absence; again, the team is said to be "all out"
3. The team batting last reaches the score required to win the match
4. The predetermined number of overs has been bowled (in a one-day match only, most commonly 50 overs; or 20 in Twenty20)
5. A captain declares his team's innings closed while at least two of his batsmen are not out (this does not apply in one-day limited over matches)

Results

If the team that bats last is all out having scored fewer runs than their opponents, the team is said to have "lost by n runs" (where n is the difference between the number of runs scored by the teams). If the team that bats last scores enough runs to win, it is said to have "won by nwickets", where n is the number of wickets left to fall. For instance a team that passes its opponents' score having only lost six wickets would have won "by four wickets".

In a two-innings-a-side match, one team's combined first and second innings total may be less than the other side's first innings total. The team with the greater score is then said to have won by an innings and n runs, and does not need to bat again: n is the difference between the two teams' aggregate scores.

If the team batting last is all out, and both sides have scored the same number of runs, then the match is a tie; this result is quite rare in matches of two innings a side. In the traditional form of the game, if the time allotted for the match expires before either side can win, then the game is declared a draw.

If the match has only a single innings per side, then a maximum number of deliveries for each innings is often imposed. Such a match is called a "limited overs" or "one-day" match, and the side scoring more runs wins regardless of the number of wickets lost, so that a draw cannot occur. If this kind of match is temporarily interrupted by bad weather, then a complex mathematical formula, known as the Duckworth-Lewis method after its developers, is often used to recalculate a new target score. A one-day match can also be declared a "no-result" if fewer than a previously agreed number of overs have been bowled by either team, in circumstances that make normal resumption of play impossible; for example, wet weather.

Weather

Cricket is a sport played predominantly in the drier periods of the year. But, even so, the weather is a major factor in all cricket matches.

A scheduled game of cricket cannot be played in wet weather. Dampness affects the bounce of the ball on the wicket and is a risk to all players involved in the game. Many grounds have facilities to cover the cricket pitch (or the wicket). Covers can be in the form of sheets being laid over the wicket to elevated covers on wheels (using the same concept as an umbrella) to even hover covers which form an airtight seal around the wicket. However, most grounds do not have the facilities to cover the outfield. This means that in the event of heavy bouts of bad weather, games may be cancelled, abandoned or suspended due to an unsafe outfield.

Another factor in cricket is the amount of light available. At grounds without floodlights (or in game formats which disallow the use of floodlights), umpires can stop play in the event of bad light as it becomes too difficult for the batsmen to be able to see the ball coming at them, (and in extreme cases, members of the fielding team).

On the other hand, in instances of good light, batsmen can utilize sight-screens which enable batsmen to have a white background against which they can pick out the red ball with greater ease.

The umpires always have the final decision on weather related issues.

Types of matches

Cricket is a multi-faceted sport which, in very broad terms, can be divided into major cricket and minor cricket based on playing standards. A more pertinent division, particularly in terms of major cricket, is between matches in which the teams have two innings apiece and those in which they have a single innings each. The former, known as first-class cricket, has a duration of three to five days (there have been examples of "timeless" matches too); the latter, known as limited overs cricket because each team bowls a limit of typically 50 overs, has a planned duration of one day only (a match can be extended if necessary due to bad weather, etc.).

Typically, two-innings matches have at least six hours of playing time each day. Limited overs matches often last six hours or more. There are usually formal intervals on each day for lunch and tea with brief informal breaks for drinks. There is also a short interval between innings. Historically, a form of cricket known as single wicket has been extremely successful and many of these contests in the 18th and 19th centuries qualify as major cricket matches. In this form, although each team may have from one to six players, there is only one batsman at a time and he must face every delivery bowled while his innings lasts. Single wicket has rarely been played since limited overs cricket began.

Test cricket

A Test match between South Africa and England in January 2005. The men wearing black trousers are the umpires. Teams in Test cricket,first-class cricket and club cricket wear traditional white uniforms and use red cricket balls.

Test cricket is the highest standard of first-class cricket. A Test match is an international fixture between teams representing those countries that are Full Members of the ICC.

Although the term "Test match" was not coined until much later, Test cricket is deemed to have begun with two matches between Australia and England in the 1876–77 Australian season. Subsequently, eight other national teams have achieved Test status: South Africa (1889), West Indies (1928), New Zealand (1929), India (1932), Pakistan (1952), Sri Lanka (1982), Zimbabwe(1992) and Bangladesh (2000). Zimbabwe subsequently suspended its Test status in 2006 due to its inability to compete against other Test teams and has yet to resume playing Test cricket.^[24]

Welsh players are eligible to play for England, which is in effect an England and Wales team. The West Indies team comprises players from numerous states in the Caribbean, most notably Barbados, Guyana, Jamaica, Trinidad & Tobago, the Leeward Islands and the Windward Islands.

Test matches between two teams are usually played in a group of matches called a "series". Matches last up to five days and a series normally consists of three to five matches. Test matches that are not finished within the allotted time are drawn.

Since 1882, most Test series between England and Australia have been played for a trophy known as The Ashes. Some other series have individual trophies too: for example, the Wisden Trophy is contested by England and West Indies; the Frank Worrell Trophy by Australia and West Indies.

Limited overs

An ODI match between India and Australia in January 2004. The men wearing black trousers are the umpires. Teams in limited overs games, such as ODIs and T20s, wear multi-coloured uniforms and use white cricket balls.

Standard limited overs cricket was introduced in England in the 1963 season in the form of a knockout cup contested by the first-class county clubs. In 1969, a national league competition was established. The concept was gradually introduced to the other major cricket countries and the first limited overs international was played in 1971. In 1975, the first Cricket World Cup took place in England. Limited overs cricket has seen various innovations including the use of multi-coloured kit and floodlit matches using a white ball.

A "one day match", named so because each match is scheduled for completion in a single day, is the most common form of limited overs cricket played on an international level. In practice, matches sometimes continue on a second day if they have been interrupted or postponed by bad weather. The main objective of a limited overs match is to produce a definite result and so a conventional draw is not possible, but matches can be undecided if the scores are tied or if bad weather prevents a result. Each team plays one innings only and faces a limited number of overs, usually a maximum of 50. The Cricket World Cup is held in one day format and the last World Cup in 2007 was won by Australia. The next World Cup will hosted by India, Bangladesh and Sri Lanka in 2011.

Twenty20 is a new variant of limited overs itself with the purpose being to complete the match within about three hours, usually in an evening session. The original idea, when the concept was introduced in England in 2003, was to provide workers with an evening entertainment. It has been commercially successful and has been adopted internationally. The inaugural Twenty20 World Championship was held in 2007 and won by India. 2009's Twenty20 World Championship was staged in England and won by Pakistan. The next Twenty20 World Championship will be held in the West Indies. After the inaugural ICC World Twenty20 many domestic Twenty20 leagues were born. First of them was Indian Cricket League which is considered as rebel league since it is unauthorized by BCCI and led to form an official league called the Indian Premier League. Both these leagues are cash rich and attracted players and audience around the globe. Recently Twenty20 Champions League was formed as a tournament for domestic clubs of various countries.